Veniamin Iosifovich GOLDFARB, Ph.D.

gold@im.udm.ru

 

Professor, Doctor of Technical Sciences, Honored Scientist of Russian Federation and Republic of Udmurtia, Academician of the Russian Academy of Natural Sciences, Academician of the International Informatization Academy

Director, Institute of Mechanics, Izhevsk State Technical University, Izhevsk, Russia

Chairman of the Gearing Committee, International Federation for Theory of Machine and Mechanisms

Chairman of the editorial board and chief-editor of the International Journal "Gearing and Transmissions"

 

SPECIALIZATION

 

 

DEGREE INFORMATION

1997

Academician

RUSSIAN ACADEMY OF NATURAL SCIENCES

1998

Active member

NEW YORK ACADEMY OF SCIENCES

1994

Academician

INTERNATIONAL INFORMATIZATION ACADEMY

1987

Full Professor

IZHEVSK MECHANICAL INSTITUTE, Izhevsk, Russia

June 1986

Doctor of technical sciences - Full Doctor (in the Theory of Machines and Mechanisms)

Thesis: The basis of the theory of the analysis and synthesis of generalized kind of worm gears

Moscow, Russia

April 1969

Ph.D. (Machinery)

Thesis: The investigation of the varieties of worm face gears

Moscow, Russia

June 1962

M.S. in Engineering

IZHEVSK MECHANICAL INSTITUTE, Izhevsk, Russia.

 

PROFESSIONAL EXPERIENCE

Date

Job title

Job description

2/1/1994

to

present

Director of Institute of Mechanics, Izhevsk State Technical

University

Supervising scientific programs and projects, organizing of manufacturing of progressive transmissions and gears, editing of the scientific journal, organizing meetings, symposiums and seminars. Lecturing in New Prospective of Theory of Machines and Mechanisms, Theory of Gearing, CAD of Gears, Applied Geometry, Theory of Design and Manufacturing of Worm Face Gears. Vice-Chairman of the certification committee to award Ph.D. and M.S. degree.

2/1/1994

to

present

Head of Department of Production Engineering of Izhevsk State Technical University, Professor

Organizing and managing of postgraduate and Ph.D. training, supervising Ph.D. and M.S. projects, organizing and leading of scientific activity in the area of Progressive Gears. Lecturing in Theory of Machines and Mechanisms, Theory of Design and Manufacturing of Worm face Gears, and Accuracy of Mechanisms.

9/10/1993

to

present

Director of Scientific-Industrial Center "Mechanic"

Organizing of manufacturing of new transmissions, supervising of the design and production of the original machinery and equipment, Worm face gear, gear-boxes and motor-gears.

9/14/1987

-

2/1/1994

Full Professor of Izhevsk Mechanical Institute

Lecturing in Applied Mechanics, Theory of Screw Surfaces, and Applied Differential Geometry. Extensive scientific activity in the area of Gears and Transmissions, Applied Geometry, CAD of gears. Supervising of Ph.D. and M.S. students, participation in the certification committee to award Ph.D. and M.S. degree.

2/16/1970

-

9/14/1987

Associate Professor of Izhevsk Mechanical Institute

Lecturing in Applied Mechanics, Theory of Screw Surfaces, and Applied Differential Geometry. Supervising M.S. projects. Performing research in Gears and Transmissions, Mathematical Modeling, Theory of Surfaces.

9/1/1965

-

2/16/1970

Lecturer, Senior Assistant Professor of Izhevsk Mechanical Institute

Lecturing, laboratory practice and recitation in Mechanisms and Instrument’s Parts, CAD of Gears. Performing research in CAD of gears.

9/1/1962

-

9/1/1965

Assistant Professor of Izhevsk Mechanical Institute

Lecturing, laboratory practice and recitation in Mechanisms and Instrument’s Parts, CAD of Gears. Performing research in CAD of gears.

ACADEMIC TEACHING

Graduate school

Courses:

Postgraduate school

Courses:

Ph.D. program

Supervised 18 Ph.D. students, that successfully received a degree of Ph.D. (14) and Doctor of Sciences (4), currently supervising 8 Ph. D. students

Textbooks:

Author of 5 textbooks, science editor and/or member of editorial boards of more than twenty books.

Since 1992 - the Chairman of the editorial board and chief-editor of the International Journal "Gearing and Transmissions", the official journal of the Gearing Committee of International Federation for Theory of Machine and Mechanisms

 

SCIENTIFIC ACTIVITY

Date

 

1998 to present

Chairman, International Federation For Theory Of Machine And Mechanisms (Iftomm), Gearing Committee

1993 to present

Organizing coordinator and scientific leader of International Scientific-Technical Program "New generation of motion and power transmissions"

1993 to present

Director of scientific-industrial center "MECHANIC"

1992 to present

Vice-chairman of coordinate council and scientific leader of Russian innovative scientific-technical program of Ministry of Higher Education "Progressive Gears"

1992 to present

Chairman of the editorial board and chief-editor of the International Journal "Gearing and Transmissions", the official journal of the Gearing Committee of International Federation for Theory of Machine and Mechanisms

1991 to present

Vice-President, Russian Association Of Mechanical Transmission Engineers

1980

Organizer of scientific research and development laboratory (since 1994 Institute of Mechanics) for investigation, design and manufacturing of new types of gears

1968 to present

Scientific leader, manager and executor of more than forty contracts with machinery companies, firms and other industrial and scientific institutions

MEMBERSHIP

International Scientific Organizations

1994 - to present

Active member, Academician

INTERNATIONAL INFORMATIZATION ACADEMY

1998

Active member

NEW YORK ACADEMY OF SCIENCES

1998 - to present

Chairman

INTERNATIONAL FEDERATION FOR THEORY OF MACHINE AND MECHANISMS (IFTOMM), GEARING COMMITTEE

since 1993 - to present

Member, Representative of Russia

INTERNATIONAL FEDERATION FOR THEORY OF MACHINE AND MECHANISMS (IFTOMM), GEARING COMMITTEE

1993 - to present

Member, Representative of Russia

INTERNATIONAL ORGANIZATION FOR STANDARTIZATION (ISO), TC60

1994 - to present

Honorary Member

SLOVAC SOCIETY OF MACHINERY

1992 - to present

Chief-editor, Chairman of the editorial board

INTERNATIONAL JOURNAL "GEARING & TRANSMISSIONS"

 

National Scientific Organizations

since1997

Active Member, Academician

RUSSIAN ACADEMY OF NATURAL SCIENCES

since 1993

Member

RUSSIAN NATIONAL COMMITTEE OF INTERNATIONAL FEDERATION FOR THEORY OF MACHINE AND MECHANISMS (IFTOMM)

since 1987

Member

RUSSIAN STANDARTIZATION ORGANIZATION, TC 258

since 1991

Vice-President

RUSSIAN ASSOCIATION OF MECHANICAL TRANSMISSION ENGINEERS

 

 

Scientific and Administrative Councils:

Scientific council to award scientific degree of Ph.D. Vice-Chairman

Four scientific councils to award degrees of Doctor Member

of Technical Sciences and Ph.D.

Scientific-administrative council of the Izhevsk State Member

Technical University

Scientific-administrative council of the Robotics Member

Faculty of the Izhevsk State Technical University

 

ACADEMIC HONORS

 

PUBLISHING ACTIVITY

PUBLICATIONS

 

BOOKS:

  1. Tables of coordinates, radii-vectors and radii of curvature of involute points of gear wheels with teeth number 12..120. – Mashinostroenie, Moscow., 1964, 158p. (in Russian). Co-author: Yastrebov V.M.
  2. Worm face cylindrical gearing. Geometry calculation. Methodology manual. – Gosstandard, M., 1977, 86p. (in Russian). Co-authors: Georgiev A.K., Yeserskaya S.V., Man’shin S.D.
  3. Worm face gears. Terms, definitions and symbols. GOST 22850-77. – Gosstandard, M., 1977, 76p. (in Russian). Co-authors: Georgiev A.K., Rud’ L.V.
  4. Methodology manuals and assignments. Term project on "Mechanisms of computer system devices" – Izhevsk Mechanical Institute, Izhevsk, 1988, 35p. (in Russian). Co-author: Pozdeeva S.V.
  5. Mechanisms of computer system devices. Assignments for individual work. – Izhevsk Mechanical Institute, Izhevsk, 1990, 51p. (in Russian). Co-author: Pozdeeva S.V.

 

PATENTS (TOTAL - 22):

Forteen Russian patents:

N208396, N806935, N875133, N973973, N1059325, N1199461, N1231717, N1237896, N1421912, N1744351, N2092726, N2092727, N2095204, N2101582.

Eight foreign patents:

 

SCIENTIFIC EDITOR OR MEMBER OF EDITORIAL BOARDS OF 27 BOOKS

  1. Problems of gearing improvement. Proceedings of scientific seminar of Scientific-Educational Center for Gearing and Gearbox Design, Izhevsk-Moscow, 2000

Scientific editor

  • Problems of characterization analysis and logic control. Academic collection of scientific papers, Moscow, 1999
  • Member of the editorial board

  • Problems of Machine Product Design and Informatization. Papers by researchers and postgraduates. Scientific-Educational Center for Gearing and Gearbox Design, Izhevsk, 2000
  • Scientific editor

  • Theory and Practice of Gearing. Proceedings of the International Conference, Izhevsk 1998
  • Scientific editor

  • Problems of Machine Product Design. Papers by researchers and postgraduates. Research and Development Center for Gearing and Gearbox Design of the Institute of Mechanics of the Izhevsk State Technical University, Izhevsk, 1998
  • Scientific editor

  • Symposium on Informational Mathematics in Information Science. Proceedings of the Symposium, Moscow, Izhevsk, 1997
  • Scientific editor

  • Theory and practice of gearing. Proceeding of the International Conference, Izhevsk, 1996
  • Scientific editor

  • CAD in Production Engineering. Collection of reports of Izhevsk State Technical University, Izhevsk, 1996
  • Vice-chairman of the editorial board

  • Progressive Gearing. Proceeding of the International symposium, Izhevsk, 1994
  • Scientific editor

  • Development of gearing geometry Proceeding of the International symposium, Izhevsk, 1993
  • Scientific editor

  • CAD of mechanical transmissions. Proceeding of the International Seminar, Izhevsk, 1991
  • Scientific editor

  • Development and use of CAD/CAM in machine building. Proceeding of the conference, Izhevsk, 1989
  • Scientific editor

  • Computerization of the educational process in universities. Proceeding of USSR’s conference, Leningrad, 1989
  • Member of the editorial board

  • Program-methodological and program-technical systems CAD/CAM. Proceeding of the conference, Izhevsk, 1988
  • Scientific editor

  • Mathematical modeling in engineering. Proceeding of the conference, Ustinov, 1988
  • Chairman of the editorial board

  • Mathematical support and software for integrated systems CAD/CAM. Proceeding of the coordinating meeting Ustinov, 1987
  • Scientific editor

  • Automated drafting of the transmission elements. Proceeding of the seminar, Izhevsk, 1987
  • Scientific editor

  • Automated design of machines, machine tools, devices and technological processes in machine building. Proceeding of the USSR’s conference, Ustinov, 1986
  • Member of the editorial board

  • Mathematical and program tools in Automated designing. Ustinov, 1986
  • Scientific editor

  • Mathematical providing of systems with machine graphics. Proceeding of the seminar, Ustinov 1985
  • Member of the editorial board

  • Automated design in machine building. Proceeding of the conference, Ustinov, 1985
  • Member of the editorial board

  • Automated design of the electro-mechanical systems. Proceeding of the conference. Izhevsk, 1985
  • Scientific editor

  • The development and introducing of CAD in machine building. Proceeding of the conference, Izhevsk, 1983
  • Substitute of the chairman of the editorial board

  • Automated designing of the mechanical transmissions. Proceeding of the conference, Izhevsk, 1982
  • Scientific editor

  • The development and introducing of CAD. Proceeding of the conference, Izhevsk, 1981
  • Substitute of the chairman of the editorial board

  • Prospects of the development and using of Worm face transmissions and drives. Proceeding of the USSR’s conference, Izhevsk, 1979
  • Member of the editorial board

  • Mechanical transmissions. Second edition. Izhevsk, 1977
  • Member of the editorial board

     

    LIST OF OTHER ESSENTIAL PUBLICATIONS

    For the period 1989-2000

    Total number of publications is 254

     

    2000

    1. About the scientist. Dedicated to the 65th anniversary of professor Airapetov E.L. // "Problems of gearing modernization", Izhevsk-Moscow, 2000 p. 7-18 (in Russian).

    2. Creation of education scientific center of gear research and gearboxes manufacture // "Problems of gearing modernization", Izhevsk-Moscow, 2000 p.43-48 (in Russian).

    Co-author: Airapetov E.L.

    3. Geometry of internal quasi-involute meshing of coaxial epicyclic gear satellite // "Problems of gearing modernization", Izhevsk-Moscow, 2000 p. 72-81 (in Russian).

    Co-authors: Plekhanov F.I., Plekhanov D.F.

    4. Investigation results of friction factors in a cylindrical Worm face gearing // "Problems of gearing modernization", Izhevsk-Moscow, 2000 p. 144-148 (in Russian).

    Co-author: Anferov V.N.

    5. Design and application of Worm face gears, gearboxes and gearmotors. Proceedings of the 5th International Conference "Dynamics of Machine Aggregates", Gabcikovo, Slovakia, 2000, p.66-73 (in Russian).

    6. Creation of international scientific educational center "Gearing and Transmissions". Proceedings of the 5th International Conference "Dynamics of Machine Aggregates", Gabcikovo, Slovakia, 2000, p.73-79 (in Russian).

    Co-authors: Airapetov E.L., Mudrik J., Kral S, Kratochvil C.

    7. Directions in gear research – contribution and function of IFToMM technical committee on gearing. Proceedings of the International Conference on Gearing, Transmissions and Mechanical Systems, Nottingham, London, 2000, p.3-9.

    8. Investigation of Worm face gear tooth tangency under action of errors. Proceedings of the International Conference on Gearing, Transmissions and Mechanical Systems, Nottingham, London, 2000, p.65-73.

    Co-authors: Kuniver A.S., Koshkin D.V.

    9. Computerized Simulation of Enveloping Process for Different Application. Proceedings of 26th Design Automation Conference, 2000 ASME Design Engineering Technical Conference, Baltimore, USA, 2000.

    Co-author: Voznyuk R.V.

    10. Predesign Investigations of Non-Orthogonal Worm face Gears. Proceedings of 8th Power Transmissions and Gearing Conference, 2000 ASME Design Engineering Technical Conference, Baltimore, USA, 2000.

    Co-author: Trubatchev Ye.S.

    11. Development of High-Loaded, Low-Speed Worm face Gearboxes. Proceedings of 8th Power Transmissions and Gearing Conference, 2000 ASME Design Engineering Technical Conference, Baltimore, USA, 2000.

    Co-author: Spiridonov V.M., Golubkov N.S.

    1999

    12. Development of the acoustic emission wave radiation model for gear damage diagnostics. – Proceedings of the 4th World Congress on Gearing and Power Transmissions, Volume 3, Paris, 1999, p. 2337-2345

    Co-authors: Budenkov G.A., Nedsvetskaya O.V.

    13. Computer-aided design and some results of Worm face gears and gearboxes investigation. – Proceedings of the 4th World Congress on Gearing and Power Transmissions, Volume 1, Paris, 1999, p.

    Co-authors: Trubatchev Ye.S., Kuniver A.S., Monakov A.V.

    14. Skew axis gearing scheme classifier building technique. – Proceedings of the 10th World Congress on TMM, vol.6, Oulu, Finland, June 20-24, 1999, p. 2227-2232

    Co-author: Malina O.V.

    15. Some theoretical and practical aspects of developing CAD-system for spur and helical gears design. – Proceedings of the 10th World Congress on TMM, vol.6, Oulu, Finland, June 20-24, 1999, p. 2276-2280

    Co-author: Tkachev A.A.

    16. Analytical and experimental assessment of Worm face gear tooth deflection. – Proceedings of the 10th World Congress on TMM, vol.6, Oulu, Finland, June 20-24, 1999, p. 2257-2262

    Co-authors: Airapetov E.L., Novosyelov V.Yu.

    17. Trends of gearing theory development. – Proceedings of the 10th World Congress on TMM, vol.6, Oulu, Finland, June 20-24, 1999, p. 24-29

    18. Computer-aided design of machine-part surfaces // "Problems of characterizing analysis and logic control", Scientific work proceedings, M., 1999, p. 75-80 (in Russian).

    Co-authors: Glavatskikh D.V., Su D.

    19. Method of classifier generation of material object class for gearing schemes with skew axes // Problems of characterizing analysis and logic control", Scientific work proceedings, M., 1999, p.80-90 (in Russian).

    Co-author: Malina O.V.

    20. To the choice of parameters and scheme of roller stand friction unit when modeling Worm face cylindrical gearing. Proceedings of International conference "Strojne inžinierstvo - 99", Bratislava, 1999, đ.201-204 (in Russian).

    Со-author: Anferov V.N.

    21. Numerical modeling of localized contact of modified Worm face gearing. CO-MAT-TECH’99, 7 International Conference, STU, Trnava, 1999, p. 318-324 (in Russian).

    Co-authors: Koshkin D.V.

    1998

    22. Russian “Advanced Gear Transmissions” Program. Gearing and Transmissions, №2, 1998, p. 30-41.

    23. Patent of Russia №2101582 dated 10.01.98 “Internal gear with skew axes” (in Russian).

    Co-authors: Russkikh A.G., Trubachev Ye.S.

    24. Scientific trends of Institute of mechanics of IzhSTU. – Design problems of machine units. Proceedings of research assistants of Education Scientific Center of gear research and gearbox manufacture of Institute of Mechanics of IzhSTU, Izhevsk, 1998, p.3-8 (in Russian).

    25. Worm face gearboxes and gearmotors: design and application experience: Mechanics in Design, Proceedings of the International Conference, Nottingham, UK, 1998, p.36-43.

    26. CAD for the choice of shift coefficients in designing spur and helical gears: Mechanics in Design, Proceedings of the International Conference, Nottingham, UK, 1998, p.71-78.

    Co-authors: Tkachev A.A., Sobakin V.L.

    27. Development of a CAD tool for enveloping modeling: Mechanics in Design, Proceedings of the International Conference, Nottingham, UK, 1998, p.471-478.

    Co-author: Voznyuk R.V.

    28. Creation of testing laboratory for gear and gearbox certification: Proceedings of the Conference "Quality, safety and energy-saving ", Samara, SamSTU, 1998, p.15-17 (in Russian).

    Co-author: Mokretsov V.N.

    29. Integration of investigation and educational science on gear research. – Dynamics of machine aggregates. Proccedings of 4th International Conference. Gabcikovo, Slovak Republic, 1998, p.48-53 (in Russian).

    Co-author: Airapetov E.L.

    30. Influence of production and assembly errors of Worm face gearing on clearance map in the mesh. – Strojne inzinierstvo. Proceedings of International Conference. Part 1, STU, Bratislava, 1998, p.245-250 (in Russian).

    Co-authors: Abramov A.I., Koshkin D.V.

    31. Analysis of methods of contact localization in Worm face gears. – Strojne inzinierstvo. Proceedings of International Conference. Part 1, STU, Bratislava, 1998, p.251-254 (in Russian).

    Co-authors: Kuniver A.S., Koshkin D.V.

    32. Problems of creation of Russian educational scientific center of gear research and gearbox manufacture (FGP "Integration", stage 1997) – Bulletin of IzhSTU, №1, 1998, p.9-11 (in Russian).

    33. Russian program "Progressive gears" and prospects of its development. – Proceedings of the International Conference "Theory and practice of gearing", Izhevsk, 1998, p.31-44 (in Russian).

    Co-author: Abramov I.V.

    34. Development of new generation Worm face gearboxes and gearmotors. – Proceedings of the International Conference "Theory and practice of gearing", Izhevsk, 1998, p.316-320 (in Russian).

    Co-authors: Mokretsov V.N., Spiridonov V.M., Golubkov N.S.

    35. New design of carrier-free planetary transmissions. – Proceedings of the International Conference "Theory and practice of gearing", Izhevsk, 1998, p.324-330 (in Russian).

    Co-authors: Makarov N.G., Plekhanov D.F.

    36. Methods of vibration and noise lowering in gear transmissions. – Proceedings of the International Conference "Theory and practice of gearing", Izhevsk, 1998, p.101-107 (in Russian).

    Co-authors: Airapetov E.L., Aparkhov V.I.

    37. IFToMM Gearing and Transmissions Technical Committee activity concepts. – Gearing and Transmissions, №1, 1998, p.53-65.

    1997

    38. Pilot Project in International Electronic Distance Education in Russia. - The Journal Technological Horizons in Education, Vol.24, N6, January 1997, p.61-66.

    Co-authors: Slusky L., Yampolsky V.Z., Partow P., Dubina G.

    39. Russia participation in scientific and economic cooperation.- Proceedings of the International seminar on attracting of non-budget funds for effective high-school science and educational service development, St.Petersburg, 1997, p.66-70. (In Russian)

    40. Peculiarities of nonorthogonal Worm face gearing parametric synthesis.: Proceedings of International Conference on Mechanical Transmissions and Mechanisms (MTM’97), Tiajin, China, 1997, p.613-616.

    Co-author: Trubatchev Ye.S.

    41. Vibration and accuracy of Worm face gears.: Proceedings of International Conference on Mechanical Transmissions and Mechanisms (MTM’97). Tiajin, China, 1997, p.617-619.

    Co-author: Abramov A.I.

    42. Development and improvement of progressive Worm face gearing – basic scientific direction of the Institute of Mechanics of IzhSTU. – Selected scientific notes, Vol.1, IzhSTU publication, Izhevsk, 1997, p.45-50. (In Russian)

    43. Calculation model of Worm face gear tooth bending deformation. - Proceedings of International XXXVIII Machine Parts Department Conference, Slovakia, Bratislava, 1997, p.26-29.(In Russian)

    Co-authors: Airapetov E.L., Novosyolov V.Yu.

    44. Computer system for spur gearing design. - Proceedings of International XXXVIII Machine Parts Department Conference, Slovakia, Bratislava, 1997, p.55-57. (In Russian)

    Co-author: Tkatchev A.A.

    45. Use perspectives of Worm face gears in practice.-Proceedings of International XXXVIII Machine Parts Department Conference, Slovakia, Bratislava, 1997, p.101-104.

    Co-authors: Majercak P., Kral S., Antala J.

    46. Przeslanki optimalizacji stuktury zautomatizowanego systemu projekto- wania pzekladni Worm facealnych. - VIII Miezdunarodowa Konferencja naukowo - technizka. Sekcja II, Projektiwanie wspolbiezne, Zilona Gora, Polska, 1997, p.37-42.

    Co-authors: Korolyova Ye.V., Legutko S.

    47. Development of microdrives with Worm face gear. - Mechatronika-97, III Konferencja Naukovo-Techniczna, Tom II, Warszawa, 1997, p.485-487.

    Co-author: Spiridonov V.M.

    48. Worm face gear-drives and gear-motors: experience of development and production. – Drive Engineering, N 4, 1997, p.36-38. (In Russian)

    Co-authors: Moketsov V.N., Spiridonov V.M., Ivaykin V.A., Matveyev V.I.

    49. On the bearing pattern localization in Worm face gearing. – Proceedings of the VI International Symposium "Theory of Actual Gearing", part 1, Kurgan, 1997, p.29-31. (In Russian)

    Co-authors: Kuniver A.S., Koshkin D.V.

    50. Classification and computer base of schemes of gearing with skew axes. - Proceedings of the VI International Symposium "Theory of Actual Gearing", part 1, Kurgan, 1997, p.40-41. (In Russian)

    Co-author: Russkikh A.G.

    1996

    51. Design of the two-stage Worm face gear units and gear-motors.- Proceedings of the International Conference on Gears., VDI, Dresden, Apr. 22-24, 1996, p.579-586.

    Co-author: Spiridonov V.M.

    52. Peculiarities of Worm face gear wheel hobbing.- Proceedings of the IX International Conference of Tools, Hungary, Miskolc,1996, p.441-444.

    Co-authors: Kuniver A.S., Trubatchev Ye.S.

    53. The simulation of the screw surface formation on the base of nondifferential method.- Proceedings of the IX International Tool Conference, Hungary, Miskolc, 1996, p.469-474.

    Co-author: Glavatskikh D.V.

    54. Some results of joint research on International Scientific Programme "New generation machanical drives". - Proceedings of the International Seminar "Problems of the dynamics aggregates", Trnava, Slovakia, 1996, p.7. (In Russian)

    Co-authors: Mudrik J., Kral S., Oleksiuk V.

    55. Investment of machine aggregates dynamics into theory of machines and mechanisms.- Proceedings of the International Seminar "Problems of the dynamics aggregates", Trnava, Slovakia, 1996, p.9. (In Russian)

    Co-author: Mudric J..

    56. Research of effect of primary errors on Worm face gearing kinematic accuracy. - Proceedings of the International Seminar "Problems of the dynamics aggregates", Trnava,Slovakia, 1996, p.19. (In Russian)

    Co-author: Abramov A.I.

    57. International and Russian Programms of gearing and gearboxes development. – Proceedings of the International Conference "Theory and Practice of Gearing". Izhevsk, 1996, p.13-23. (In Russian)

    58. Investigation of vibroacoustic properties of Worm face gear.- Proceedings of the International Conference "Theory and Practice of Gearing". Izhevsk, 1996, p.135-140. (In Russian)

    Co-author: Abramov A.I.

    59. Experience of development and manufacturing of Worm face gearboxes and gear-motors. - Proceedings of the International Conference "Theory and Practice of Gearing". Izhevsk, 1996, p.213-218. (In Russian)

    Co-authors: Mokretsov V.N., Spiridonov V.M., Ivaykin V.A., Matveyev V.I.

    60. Software tools of enveloping process simulation. - Proceedings of the International Conference "Theory and Practice of Gearing". Izhevsk, 1996, p.481-484. (In Russian)

    Co-authors: Glavatskikh D.V., Voznyuk R.V.

     

    1995

    61. Theory of design and practice of development of Worm face gearing. - XXXVI Conference of Department of Machine Parts and Machine Design Proceedings./Vol.1. Technical University of Brno, 1995, p.115-120.

    62. Features of design of bearing units of a Worm face gearbox worm shaft. - XXXVI Conference of Department of Machine Parts and Machine Design Proceedings./Vol.1. Technical University of Brno, 1995, p.121-124. (in Russian)

    Co-authors: Golubkov N.S., Bazhin A.G.

    63. Constructions of Worm face gearboxes. - XXXVI Conference of Department of Machine Parts and Machine Design Proceedings./Vol.1. Technical University of Brno, 1995, p.125-128. (in Russian)

    Co-authors: Spiridonov V.M., Malina O.V.

    64. Dynamic properties of machine aggregate with gearing. - XXXVI Conference of Department of Machine Parts and Machine Design Proceedings./Vol.2. Technical University of Brno, 1995, p.41-44.

    Co-authors: Mudrik J., Muran M., Kral S., Majercak P.

    65. Modelovanie a analyza dynamickych vlastnosti strojoveho agregatu s ozubenym prevodom. - Engineering Mechanics’95. National Conference, May 15-18, 1995, Svratka, Czech Rep., Vol.2, p.363-366.

    Co-authors: Mudrik J., Kral S., Majercak P.

    66. Variants of Worm face gearing from pitch realization point of view. - Gearing and Transmissions, N1, 1995, p.25-34.

    Co-author: Isakova N.V.

    67. The nondifferential method of the geometrical modeling of the enveloping process. - Proceedings of the Ninth World Congress on the Theory of Machines and Mechanisms, vol.1, 1995, Milano, p.424-427.

    68. Theory of design and practice of development of Worm face gearing. - Proceedings of the International Congress of Gear Transmissions, vol.2, 1995, Sofia, p.1-5.

    69. Computer-aided design of gearboxes. New approaches. - Proceedings of the International Congress of Gear Transmissions, vol.2, 1995, Sofia, p.128-131.

    70. Russia participation in Pacific Economical Cooperation.- Proceedings of International Congress of Informatization, 1995, Izhevsk, p.11-15. (in Russian)

    Co-authors: Granberg A.G., Safronov E.I.

    71. Integration experience of educational and scientific programmes of technical universities of Izhevsk, Trnava, Brno. – Proceedings of International Congress of Informatization, 1995, Izhevsk, p.32-33. (in Rusian)

    Co-authors: Abramov I.V., Mudrik J., Moravchik O., Kratokhvil C., Grois M.

    72. Vyuzitie alkalickych polyamidov v Worm facenych prevodoch. – Zbornik prednasok z konferencie. Zasadne otazky rosvoja vedy a techniky v sr.vysledky, vedy, vyskumu a vyvoja. 2 diel. Zilina, 1995, p.72-75.

    Co-authors: Kral S., Majerchak P.

    1994

    73. Development of general-purpose Worm face gearboxes and gear-motors. – Progressive gearings. Proceedings of the International Symposium, Izhevsk, 1994, p.156-161. (in Russian)

    Co-authors: Golubkov N.S., Kuniver A.S., Mokretsov V.N., Spiridonov V.M.

    74. Problems of Worm face valve drives development. – Progressive gearings. Proceedings of the International Symposium, Izhevsk, 1994, p.149-156. (in Russian)

    Co-authors: Spiridonov V.M., Mokretsov V.N., Ivaikin V.A.

    75. Test rig for measurement of kinematic accuracy of Worm face gearboxes. - Progressive gearings. Proceedings of the International Symposium, Izhevsk, 1994, p.60-65. (in Russian)

    Co-authors: Tchervik V., Oleksiuk V.

    76. Reproducing capabilities of screw surface with variable pitch. - Progressive gearings. Proceedings of the International Symposium, Izhevsk, 1994, p.174-178. (in Russian)

    Co-authors: Isakova N.V.

    77. The synthesis of nontraditional kind of skew axes gearing. - International Gearing Conference, BGA transmission technology, Newcastle, MEP, London, 1994, p.513-516.

    78. Badania Worm facealnej przekladni zebatej. - Mechatronika 94, Prace naukowe conferencje, Z.3, Warszawa, 1994, s.215-218.

    Co-authors: W.Oleksiuk, W.Czerwiec.

    79. Creation of a range of new Worm face geared motors and reduction gear units. - Russian Engineering Research, Vol.70,No.12, 1994, Allerton Press, Inc, p.54-57.

    Co-author: I.I.Mardanov.

    80. Worm face gearing as an element of mechatronic system. - Euromech 318. Stability and vibration of mechatronic system,Prague, 1994, p.5.

    Co-author: Abramov A.I.

    81. Reproducing method of tool-helicoid surface with variable pitch. - Gepguarta technologia, 9-10, Budapest, 1994, p.379-381.

    Co-authors: Isakova N.V., Ivaikin V.A.

    82. Automated design of hobbing cutter. - Gepguarta technologia, 9-10, Budapest, 1994, p.421-422.

    Co-authors: Malina O.V., Ivaikin V.A.

    83. Application of progressive Worm face gearing for creation of new generation of valve drives. – Scientists of Izhevsk State Technical University – for the production. Thesises of reports of Scientific-Technical Conference, Izhevsk, 1994, p.23. (in Russian)

    Co-author: Spiridonov V.M.

    84. Application of stamp rolling in Worm face gearboxes manufacturing. - Scientists of Izhevsk State Technical University – for production. Thesises of reports of Scientific-Technical Conference, Izhevsk, 1994, p.51. (in Russian)

    Co-authors: Koryakin N.A.

    85. Some results and development prospects of international programme "New Generation Mechanical Drives". - Problems of the dynamics of machine aggregutes. Medzinarodny seminar, Bratislava, Slovakia, 1994, p.1-2. (in Russian)

    Co-authors: Airapetov E.L., Mudrik J., Kral S., Kratochvil C., Grois M., Parushev P., Abadjiev V., Oleksiuk V., Slusky L.

    86. Development of progressive technology of gears production for Worm face gear-motors. – Transfer technologies, complexes and equipment in machine-building production. Middle-volume and light-weight scientific production. Thesises of reports, Saratov, 1994, p.40-41. (in Russian)

    Co-authors: Kuniver A.S., Mokretsov V.N.

    87. Development of standard documents for preparation of Worm face gear-motors manufacturing. – Transfer technologies, complexes and equipment in machine-building manufacturing. Middle-volume and light-weight scientific production. Thesises of reports, Saratov, 1994, p.41-42. (in Russian)

    Co-authors: Kuniver A.S., Mokretsov V.N.

    88. Approach to the synthesis of mechanisms for obtaining of screw surface of variable pitch. – Mechanics of machines. Vol.1, 1994, Varna, Pub.VMEI, p.78-80. (in Russian)

    Co-author: Isakova N.V.

    89. Possibilities of computer-aided design of hyperboloid gearings schemes. – Mechanics of machines. Vol.1, 1994, Varna, Pub.VMEI, p.80-83. (in Russian)

     

    1993

    90. Application prospects of Worm face gears in mechanisms with low-vibration level. - Mezinarodni seminar Dinamicka A Pevnostni Analiza Pohonoyich Systemu, 3-6 mai 1993, Svratka, Czech Republic, p.18-21. (in Russian)

    Co-authors: Airapetov E.L., Abramov A.I., Akhatov R.R.

    91. Approach to the evaluation of Worm face gearing load capacity. - Mezinarodni seminar Dinamicka A Pevnostni Analiza Pohonoyich Systemu, 3-6 mai 1993, Svratka, Czech Republic,p.75-82. (in Russian)

    Co-authors: Kuniver A.S.

    92. Building-block synthesis of Worm face gearboxes structure. – XVI Sympzion Podstaw Konstrukcji Maszyn, Referaty, Warszawa, 1993, p.102-109. (in Russian)

    Co-authors: Malina O.V., Bazhin A.G.

    93. Worm face gearboxes. Structures and possibilities. - XVI Sympzion Podstaw Konstrukcji Maszyn, Referaty, Warszawa, 1993, p.94-101. (in Russian)

    94. Results of complex development of Worm face gears and gearboxes. – Development of geometrical theory of gearing. Proceedings of the International Symposium, Izhevsk, 1993, p.9-12. (in Russian)

    95. Geometry of variable pitch Worm face gearing. – Development of gearing geometry theory. Proceedings of the International Symposium, Izhevsk, 1993, p.37-38. (in Russian)

    Co-author: Isakova N.V.

    96. Geometrical modeling of teeth flanks. – Development of gearing geometry theory. Proceedings of the International Symposium, Izhevsk, 1993, p.24-25. (in Russian)

    Co-author: Oleksiuk V.

    97. Methodology and results of evaluation of Worm face gearings load capacity. – Theory of actual gearing. V International Symposium, Kurgan, 1993, p.20-21. (in Russian)

    Co-authors: Kuniver A.S., Mokretsov V.N.

    98. Experimental investigation of dynamics of aggregate machine with gear-motor. – Development of gearing geometry theory. Proceedings of the International Symposium, Izhevsk, 1993, p.61-62. (in Russian)

    Co-authors: Mudrik J., Parushev P., Kosorin D.

    99. Integration of Worm face gearings and gearboxes CAD. – Theory of actual gearing. V International Symposium, Kurgan, 1993, p.7. (in Russian)

    100. Getting machine-building products smart. – World Congress ITS-93 "Informatizational communications, nets, systems and technologies", Moscow, 1993, p.169-174. (in Russian)

    Co-author: Malina O.V.

    101. Rational choice of Worm face gear parameters in terms of strength. – Problems of gearing and gearboxes production. Thesises of reports of Scientific-Technical Conference, Kharkov, 1993, p.35.

    Co-authors: Kuniver A.S., Mokretsov V.N.

    102. Development, investigation and manufacturing of large demand transfer mechanisms on the base of Worm face gears. – Transfer technologies, complexes and equipment in machine-building production. Middle-volume and light-weight scientific production. Thesises of reports, Saratov, 1994, p.63-64. (in Russian)

    Co-authors: Mokretsov V.N., Kuniver A.S.

    103. Application prospects of stamp rolling in Worm face gearboxes manufacturing. – "Perspective processes of formation of metals with local variable spot of plastic stress. Thesises of reports of Russian seminar, Izhevsk, 1993, p.9-10. (in Russian)

    Co-author: Koryakin V.N.

    1992

    104. New series of Worm face reducers and motor-reducers. Design and manufacturing. - The 3-d world congress on gearing and power transmission, Paris, 1992, p.281-287.

    Co-author: Koryakin N.A.

    105. Computer-Aided synthesis of gearing structure under arbitrary arrangment of axes. - Sixth International Conference on the Theory of Machines and Mechanisms, september,1992, Liberec, Czech republic, p.65-71.(in Russian)

    Co-author: Russkikh A.G.

    106. Peculiarities of mesh areas choice for Worm face gearings with rotaprint lubrication. - Proceedings of the Fifth International Youth Summer School. Application of mechanics and biomechanics in mechatronics, 1992, Varna, Bulgaria, p.76-81. (in Russian)

    Co-authors: Anferov V.N.

    107. Alternative approaches to the choice of screw factor value when designing Worm face gears. - Proceedings of the Fifth International Youth Summer School. Application of mechanics and biomechanics in mechatronics, 1992, Varna, Bulgaria, p.96-105. (in Russian)

    Co-authors: Isakova N.V.

    1991

    108. Branch aspects of gearboxes CAD development. – "Problems of mechanical gears and gearboxes quality. Accuracy and checkup of Worm face gear-wheels and gearings, Leningrad, 1991, p.64-65. (in Russian)

    109. Wheel of Worm face gearing subjected to wear tests. – Information sheet N66-91, Udmurt CSTI, part 55, 1991, 4p. (in Russian)

    Co-authors: Kuniver A.S., Tchekalkin G.T.

    110. Aspects of gearings and gearboxes design automation. – Gearing and Transmissions, N1, Izhevsk, 1991, p.20-24.

    74. Marketing aspects of gearings and gearboxes CAD development. – CAD of mechanical transmissions. International seminar proceedings, Izhevsk, 1991, p.3-4. (in Russian)

    111. Computer-Aided calculation of Worm face cylindrical gearbox. - CAD of mechanical transmissions. International seminar proceedings, Izhevsk, 1991, p.41-43. (in Russian)

    Co-authors: Muntyan V.V., Yatsin J.L.

    112. Automation of building block design of Worm face gearboxes. - CAD of mechanical transmissions. International seminar proceedings, Izhevsk, 1991, p.44-46. (in Russian)

    Co-author: Malina O.V.

    113. Skew axes gearing scheme synthesis. - MPT’91 JSME International Conference on Motion and Power Transmissions, Nov.23-26, 1991, Hiroshima, Japan, p.649-653.

    Co-author: Russkikh A.G.

    114. Design and production organization of new types of gearboxes and gear-motors. - IV International youth school. "Application of mechanics and biomechanics in robotics", 1991, Varna, Bulgaria, p.15-18. (in Russian)

    115. Computer-Aided synthesis of worm type gearing schemes. - Mechanika, z.27, XV Sympozjon podstaw konstrukcji maszyn, cz.II, Komunikaty, 1991, Rzeszow, Polska, p.101-103. (in Russian)

    Co-author: Russkikh A.G.

    116. Design of Worm face gear-motors from the automation point of view. - Mechanika, z.27, XV Sympozjon podstaw konstrukcji maszyn, cz.II, Komunikaty, 1991, Rzeszow, Polska, p.105-107. (in Russian)

    Co-authors: Golubkov N.S., Malina O.V.

    1990

    117. Structural approach to Computer-aided product design with gearbox as an example. – "Computer-Aided logical control". XIII USSR Symposium, Moscow, Scientific Council of Academy of Sciences USSR on the "Cybernetics" problem, 1990, p.71-72. (in Russian)

    Co-author: Malina O.V.

    118. Algorithm of the test-stand control for testing of quickly rotating rotors with disbalance. – "Computer-Aided logical control". XIII USSR Symposium, Moscow, Scientific Council of Academy of Sciences USSR on the "Cybernetics" problem, 1990, p.111-112. (in Russian)

    Co-author: Kulemin V.J.

    119. Precise drives based on Worm face gearings. State and prospects. - 13.Internationales Kolloquium der Feinwerktechnik. Kopenhagen, 1990, p.3.

    120. Informational support of CAD of Worm face gear-motors. – "Development and investigation of CAD/CAM in machine-building production". Proceedings of Scientific-Technical Conference, Izhevsk, 1990, p.118-119. (in Russian)

    Co-author: Korolyova E.V.

    121. Dynamic test-stand for testing of quickly rotating rotors with large disbalance. – Dynamics of mechanical systems. Proceedings of 15th national seminar. Vol.1, Varna, 1990, p.176-178. (in Russian)

    Co-author: Kulyemin V.Yu.

    122. Creation of a number of new Worm face gear-motors and gearboxes. – Machine-building reporter, 12, 1990, p.54-57. (in Russian)

    Co-author: Mardanov I.I.

    123. Creation of a number of new Worm face gear-motors and gearboxes. – Gearings: up-to-date and progress. Thesises of reports of USSR Scientific-Technical Conference, Odessa, 1990, p.22-23. (in Russian)

    Co-author: Mardanov I.I.

    124. Providing of gearing quality at the design stage with the help of CAD. – Problems of machines quality, reliability and durability increasing. Thesises of reports of USSR Scientific-Technical Conference, Bryansk, 1990, p.13. (in Russian)

    125. Standartisation of parameters and structure unification of Worm face gearboxes and gear-motors. – Standarization and unification in the field of gearing. Thesises of reports of Scientific-Technical Conference, Kharkov, 1990, p.34-36. (in Russian)

    Co-authors: Mardanov I.I., Tchekalkin G.T.

    1989

    126. Problems of gearings development automation. – Booklet "Theory of actual gearings". Part 1. Geometry and CAD of actual gearings, The Fourth Union Symposium, Kurgan, 1989, p.8-17. (in Russian)

    127. Problems of Worm face-type gearings optium design. – Booklet "Integrated CAD systems", M., 1989, p.91-93. (in Russian)

    Co-author: Korolyova Ye.V.

    128. Peculiarities of approaches to the development and implementation of gearings and gearboxes CAD. – Computer-aided design of gearings and gearboxes. Papers of Scientific Seminar, Izhevsk, 1989, p.3-5. (in Russian)